|
Packing
Use of modern packing technologies allows “Ugra Saw Mills” to keep high quality of the goods during their storage and transportation.
The following technology is applied for timber packing:
1. After grading, sawn goods are delivered by a discharge conveyor to a separation device for preliminary partitioning. Then, a parting transporter feeds the material to an aligning roller conveyor for alignment at zero line. After that, the material is fed to a chain conveyor to be aligned in lateral position and thus is located in parallel. Then, via a takeoff conveyor, sawn goods are transported to a crosscut machine OUTPUT, where they are trimmed at both sides and become ready for packing.
2. Layers of boards are taken from outfeed grasps of the crosscut machine by a pusher to the packing line. Special grasp is used to put pallets between boards.
3. A ready pack is transported by a roller conveyor to a bundler. A bundled pack goes to drying kilns. Application of drying technology with use of “Vanicek” kilns has allowed the company to increase quality of export sawn goods.
Delivery
Well elaborated delivery scheme is a guarantee of high quality service, accuracy and speed of servicing an any place of the world.
Products manufactured at “Ugra Saw Mills” are delivered to customers by railway or motor transport in a timeline agreed with the consumers.
|
